Insert FX Post Fader on Master Track
Hi,
Any advice on how I could use Drambo’s modules to build a rack that work like post fader style FX sends, but in one chain?
I’m trying to set up Delay and Reverb as insert FX on the master track when using Drambo in the FX slot in AUM, but if there’s a clever way to build a processor chain it could also be used in other synths I’ve built.
My basic technique so far is to use a layers mixer as follows:
Layer 1 - Reverb 100% wet
Layer 2 - Delay 100% wet
Layer 3 - Dry signal
I can mix in the wet signals using each layers volume knob, but these cut off the effects tails when down.
Cheers
Comments
Just made these 2 Processor racks...
Drop on master track, dry signal will be passed, dial in send amounts (SEND T1-T8) for each fx (delay rack with filter, both reverbs and chorus), also you can adjust return amounts.
S|R - D is all Drambo modules; S|R - AU is to load 4 AU effects (when Drambo is used as a host).
(Was made with current beta, so fingers crossed it will load without issues as it may touch reworked areas)
WOW, That’s awesome. Using audio inputs from each channel works nicely with Drambo as the host. Thanks