Midi mute/ trig/ choose channel on different cc
Would be super useful if the mute and trig per channel would require a different cc.
so trig 1 cc1 mute 1 cc9
trig 2 cc2 mute 1 cc10
Would be super useful if the mute and trig per channel would require a different cc.
so trig 1 cc1 mute 1 cc9
trig 2 cc2 mute 1 cc10
Comments
I wish to use an external controller with one dedicated pad for mute and another dedicated For channel select. So I could select on the fly which channel I mute or record on.
In addition,it would be cool to skip up/down channel selection
is it possible to multi channel record into Drambo?
@TheInvisibleMan @giku
what I wish is to set on my controller 8 buttons To mute and the other 8 buttons to channel select Or 2 buttons to go up down channel selection.
that will have allow immediate Blind control. Without the need to see if trig / mute mode/ channel select changed. Which is less confusing and more direct control.
@Razmataz You can do that. Make sure you're mapping your buttons in Main/mixer view so you have access to both channel selectors (pads) and channel mutes.
Ok great. I’ll check that