Bug: Audio glitch with send p-lock
Load AN Kick on track 1. Place trig on step one.
Load ”Instrument rack - Factory - Drums - Hihat - Hats on keys” to track 2. Place trigs on steps 1 and 2. Parameter lock a send on either step. A click glitch sound occurs.
Swapping the tracks eliminates the glitch. The glitch still happens if send is p-locked to zero. Setting polyphony on hat track has no effect.
Comments
Looked into this a bit more... You don't need to use AN Kick.
-Load an oscillator on track 1
-On track 2, place a tig on step 1 and parameter lock a send on it. Turn down volume so you only hear droning osc on track 1.
-Press play and let loop.
Loading the following Instrument rack presets from the Drums folder on track 2 will produce clicks:
Tweet
Hats on keys
Marac
Wood slap 1
Cls snare A
Deaf snare
Metal snare by RS2000
One hand clap
Snares on keys
Stereo snare
Kicks on keys (clicks only when loding)
All presets from the Instrument rack Instruments folder click EXCEPT these ones:
3d boiling pad
Comb lead
FM bass
Fat mono glider
Metal case lead
Miami bass
Quite a cat
Rough bass 1
SSaw pluck
Square pluck
Water bass
Yay bass
Can anyone reproduce?
Confirmed. P-locked Send A or B on Track 2 does produce an audible glitch when there is an oscillator on Track 1. When the oscillator on Track 1 is removed, the glitch disappears (even though track 1 is unrelated to track 2, or to the sends). P-locking the sends of Track 2 on any step still results in clicks and pops. I replaced Track 1 VCO with other droning sources (peaking eq, resonating filter) and still had pops. Seems related to Track 1’s volume. The louder Track 1 is, the louder the clicks are.
I tried replacing the droning oscillator on Track 1 with some hihats+trigs, but couldn’t reproduce.
@giku I suspect it's any of the FDN or Plate reverb modules. Removing the reverb module will remove the glitch.
When I tested it there were no reverbs present, the sends were empty.
Yes, no reverbs, the clicking happens on track 1, even if send is locked to level zero.
I've only tried with the "Metal Snare" preset on track 2 and a sine oscillator on T1 and as soon as I removed the reverb module in the Snare instrument rack on T2, the clicking on T1 went away.
Having just a chorus, phaser, flanger, either of the reverbs or a sampler with multiple zones on track 2 seems to cause clicks.