Button p-locking confusion
If you p-lock a momentary button, shouldn't Drambo send out both a 1 and a following 0 on that step? Seems like it is not happening. I suppose the current behaviour makes sense for a switch button (not momentary).
Example: the rewind button in Gauss AU, which is a toggle. If I have a Drambo momentary button connected to this AU parameter, then manual tapping on the button works as expected; there is a tape rewind for each tap. If I p-lock the button on step 1 and 5, there is a rewind on step 1 on the first play, then no more. To get rewind happening again and again, I need to hold step 2 and 6 and double-tap the button to p-lock an off (correct?). It was not what I expected for a momentary button.
Comments
That’s correct.
This is the way p-locks were implemented in Drambo.
Generally you lock a value on a triggered note that has decay (duration for the lock, basically set by your Env).
But you may also lock a value without a note being triggered (trigless lock), in which case you manually have to set duration by placing another lock (to ‘unlock’)
Hope this makes sense :)
For whatever reason the way it is currently you have to p-lock the button on and again off for it to work. Its not what you’d expect but it’s easy to work around.
Ok, makes sense, work around not too bad. Was just checking that I hadn't missed anything.