Can't pan audio going thru my audio device output's 1+2
Hello Drambo users.
I dont know if it's a bug or if I am misunderstanding the stereo signal flow in the Drambo.
I'm trying to be able to pan the audio going thru my audio device output's 1+2.
Here's my patch :
Very basic but it does not work; the more I pan to the right, the more the volume attenuate in both speakers.
Can't figure out why.
Thanks for your help.
Comments
Hi Doug,
Do you have a multichannel interface? In the screenshot, it appears you're ganging your audio output. If you have a stereo interface and you insert an audio output module in the patch, it will use the same channels as Drambo's mixer (usb 1+2). This causes the signal from the audio output module and the mixer to be subbed (which is why moving the pan pot sounds like attenuation). If you have a multichannel interface, ensure the audio output in the patch and the Drambo mixer are not sharing the same output channels.
Hi Kden.
Thanks a lot for your clear explanation.
Yes I do have a 4 channels output audio interface.
I will make some test to be sure to understand what you mean.
There is a bug in audio out device, that will be fixed on upcoming update.
But you don't need it, open Track menu and set "Audio to" to your interface output. That works