@Razmataz can you please check which messages your controller sends when MIDI Learn "confuses" Drambo? Usually it's caused by a sequence of multiple MIDI messages, as Drambo might try to always use the last message received (which is good, I think).
If all fails, enable MID learn, hit and hold the pad, disable MIDI learn and release the pad. For each control.
Drambo cannot know if you're using a momentary or toggle switch.
Comments
Tap on this icon, then select control you want to map and use a midi knob / button.
Great! Many thanks 😊
So simple when you know how! I didn't even see that little icon! Thanks man.
Great feature @giku
it needed more thought and less limitation.
its a bit buggy. I’m trying to mute with midi controller mapped after changing the channel on Drambo and it gets confused.
what would make sense is each of the pads gets to be mapped as mute,channel select and trig.
@Razmataz can you please check which messages your controller sends when MIDI Learn "confuses" Drambo? Usually it's caused by a sequence of multiple MIDI messages, as Drambo might try to always use the last message received (which is good, I think).
If all fails, enable MID learn, hit and hold the pad, disable MIDI learn and release the pad. For each control.
Drambo cannot know if you're using a momentary or toggle switch.